Number of views:

CT GPX09P optical fiber distribution frame (split and split type)

Retail price
Market price
Number of views:
Product serial number

This product is designed and manufactured according to YD/T778 and the product standard of China Telecom Enterprise "CT GPX09P Optical Fiber Distribution Frame (Separate Fusion and Distribution)". The optical fiber jumper rack is an indoor optical fiber jumper. It has the functions of fiber jumper and fiber storage, large capacity, convenient operation and maintenance, and plays a major role in fiber protection.

We could not find any corresponding parameters, please add them to the properties table


The frame body is made of cold-rolled steel plate material through electroplating and plastic spraying, and adopts a welded closed structure, which has a beautiful appearance and a firm structure. The left and right side panels are built-in and detachable, and the door is an external hanging structure. Front and rear double doors structure, each door is fixed up and down with magnetic attraction. The door of the rack adopts living hinge, which can be flexibly disassembled. The opening angle of the door should not be less than 110°;

The rack adopts front and back operation, and the front is operated by fiber jumpers, and there are fiber jumpers on the left and right sides. On the right side of the front, there is a winding wheel for storing fiber jumpers. The back is used to fix and connect optical cables or pigtail cables;

Optical cables and pigtails enter the rack from the top of the rack. Each type of optical fiber or cable has an independent cable (fiber) hole, and the optical cable (fiber) hole should be protected by a protective fiber strip and have a large enough fiber-passing area;

There should be large enough fiber jumper holes on the bottom plates on both sides of the rack to meet the fiber routing when multiple racks are in parallel;

The frame body has a perfect grounding system: the top base of the frame is welded with an M8×20 stud for the frame to be grounded. Ensure electrical continuity, and effective grounding of the fiber optic cable reinforcement core and its armor layer, and the two are insulated;

Mechanical movable part: The mechanical movable part rotates flexibly, the opening of the door should be no less than 110°, and the gap should be no more than 3mm;

Adapter type: suitable for the installation of SC (or FC type) fiber optic adapters. The adapter is installed on the six-position adapter strip. The six-position adapter card bar is installed on the optical jumper unit board. (Capacity depends on user needs);

The bending radius of the incoming optical cable should be no less than 15 times the diameter of the optical cable. When the core and pigtail are bent wherever they are, the curvature radius should be no less than 30mm;

The plastic parts are made of flame-retardant materials and meet the FV0 requirements in GB2408;

Ordering guide

Similar other products

Previous page

Online service

Hotline :


© 2021 Sendall All rights reserved.